A 65W charger with three ports and a bundled cable is one of the most competitive positions in the market, and the differentiating factors are rarely dramatic. Finish, port layout, cable length and how the unit behaves in a bag are what separate a good example from an indifferent one. This review covers those practical points in order.
Design and finish
The housing uses a metallic paint finish rather than the matte plastic common to this category, which gives it a more deliberate appearance than a standard adapter. That is a cosmetic difference, but on a device that sits on a desk in view it is a visible one, and it is the first thing that distinguishes the unit from a bundled charger.
Ports, cable and simultaneous charging
The layout is one USB-A port and two USB-C ports, three outputs in total, all supporting fast charging. A 1.5 m fast-charging cable is included, which is a practical inclusion rather than a formality: purchasing a correctly rated cable separately is a common hidden cost, and a bundled cable removes the risk of pairing the charger with an inadequate one.
With all three ports occupied, a phone, a laptop and a tablet can charge at the same time. That is the core proposition of the format. It also means the unit occupies far less space on a power strip than three separate adapters would, which matters more than it sounds in a household with limited sockets.
What the three-port format displaces in a bag, and who benefits most from the swap, is the subject of One charger for everything.
The two USB-C ports are standardised connectors, so the bundled cable is interchangeable with any other compliant one; the USB-C specification covers what the port is required to negotiate.
What GaN contributes in practice
The GaN switching stage raises both thermal conductivity and charging speed relative to a conventional design of the same size. In use on a mid-range Android phone, a full charge took roughly 45 minutes. The more useful figure for daily life is the partial charge: ten minutes connected to the charger added more than 20% to the battery, which is enough to make a phone usable for an evening after an oversight earlier in the day.
Heat is the other half of the story. GaN's higher heat resistance and lower losses mean the housing stays warm rather than hot, including when three ports are charging at once. That is the condition under which a conventional design of this size would typically struggle.
The mechanism behind that behaviour is not specific to this unit, and is explained in GaN vs. silicon chargers.
Portability
The pins fold through 90 degrees, which is the detail that most affects daily handling. Folded flat, the unit is a compact block that packs without snagging on anything else, whether it is stored at home or carried in a bag. For a 65W three-port charger, the size is a genuine advantage rather than a formality: the point of the format is that it replaces several adapters without replacing their total volume.
Stated specifications
- Total output
- 65W
- Ports
- USB Type-C × 2, USB Type-A × 1, all fast charging
- Bundled cable
- 1.5 m fast-charging cable
- Pins
- Foldable, 90 degrees
- Simultaneous charging
- Up to three devices
Verdict
The unit does what the format promises. Three devices charge from one socket, the finish is better than the category average, the bundled cable removes a common hidden cost and the foldable pins make it genuinely portable. The limitations are the ones inherent to the format. 65W is shared between the ports, so a high- performance laptop charging alongside two other devices will not receive its full rate; buyers with a gaming notebook or a 16-inch workstation should look at higher-wattage multi-port designs instead.
For a laptop, a phone and earbuds or a tablet — the common three-device set — a 65W three-port GaN charger is the most efficient answer available, and this is a well-executed example of it.
A buyer who needs more shared output than 65W can supply should start from the shortlist of Best GaN chargers in 2026.
